Having a railing, door, stair, joinery or special metal part made is different from buying a ready-made product. The piece is built for your space, so the clearer the process, the better the result. This guide explains how a made-to-measure metal job runs from the first photo to handover, what is expected of you at each step and the most common mistakes.
Short answer: The process runs: (1) photos and approximate size, (2) site visit and exact measurement, (3) written quote, (4) drawing and detail approval, (5) fabrication and surface finish, (6) installation and handover. Most errors come from not measuring on site and from details not agreed in writing.
1. Start: photos, approximate size and purpose
In the first conversation it is enough to share:
- A few photos of the space (overall view and close details)
- Approximate sizes (width, length, height)
- Purpose (security, appearance, insulation, load)
- Location (district or address; floor and access)
- Any reference images or models you like
With these we can discuss product type, material and a rough framework. A firm price is not given at this stage, because exact size and detail are missing.
2. Site visit and exact measurement
The measurement used for fabrication should be taken on site. Wall and floor tilt, out-of-square openings, existing joinery and pipework do not show in photos. On site we establish:
- Exact size and allowances
- Condition of the fixing surface (concrete, brick, timber, stone)
- Access and equipment needed for installation
- Neighbouring trades: the order of painting, plastering and joinery
Why not order from your own measurements? A few millimetres of error can mean a railing, door or window that does not fit. Measuring on site is the cheapest way to avoid extra cost.
3. Written quote: what it should contain
A good quote removes ambiguity. Check that it states:
- Product description and size (quantity, model, dimensions)
- Material and thickness (steel, aluminium, glass; section and wall thickness)
- Surface finish (galvanising, primer, paint and number of coats, colour)
- Hardware and accessories (lock, hinges, motor and so on)
- Whether installation, transport and removal are included
- Lead time
- Payment plan
- Warranty scope and after-sales support
- Validity period of the quote
When comparing two quotes look not only at the total but at whether the items are equal.
4. Drawing and detail approval
Especially for railings, stairs, doors and joinery, a dimensioned drawing or sketch should be approved before production:
- Overall look and dimensions
- Profiles and infill spacing
- Opening direction, lock position
- Colour and finish
- Fixing detail
The approved drawing is the production reference. Later changes may affect time and cost, so check everything before approving.
5. Fabrication and surface finish
After approval the piece is built in the workshop:
- Cutting and fabrication: cutting, welding and assembly to size.
- Quality check: dimensions, welds and joints are inspected.
- Surface finish: where needed, galvanising, primer and powder or industrial paint.
- Packing: prepared to ship without damage.
The surface system decides how well a piece lasts: for anything exposed outdoors or near the sea, raise it already at the quote stage.
6. Transport, installation and handover
- Transport: the piece is shipped without damage to its destination, anywhere in Türkiye or to France.
- Installation: fixed with proper anchors and adjusted to suit the building.
- Touch-up and cleaning: scratches or paint marks from installation are corrected and the area cleaned.
- Handover: use and care are explained and warranty terms made clear.
What is expected of you
- Access: an empty, reachable work area
- Conditions: electricity, lift and parking details shared in advance
- Permissions: management permission, working hours and common-area rules in apartment buildings and estates
- Decisions on time: drawing approval and colour choice
Short notes by product
- Railings and stairs: size, infill spacing and anchoring are critical for safety. See choosing balcony and stair railings and our steel staircase guide.
- Doors and gates: opening direction, lock and automation must be agreed first. See the metal door guide.
- Joinery and glass: choose glass type and profile together. See the double glazing guide.
- Metal structures: engineering and permits need separate handling. See the steel structure guide.
Common mistakes
- Measuring yourself and ordering straight away.
- No written quote and drawing approval: verbal agreements cause disputes later.
- Looking at the total price only: not checking that items are equal.
- Not asking about surface finish: the main cause of rust and paint problems.
- Skipping management permission in apartment buildings and estates.
- No written delivery date.
Checklist before work begins
- Have I shared photos and approximate size?
- Is an on-site measurement booked?
- Does the quote state material, finish, installation and warranty?
- Have I approved the drawing and settled colour and details?
- Are delivery and installation dates in writing?
- Is building or estate permission needed, and obtained?
Ertürk Metal in İzmir and across Türkiye
Since 2007, Ertürk Metal has built railings, doors, stairs, joinery, motorised shutters and metal structures in its Buca, İzmir workshop, working from measurement to installation under one roof. Our own team handles measuring, shipping and installation across Türkiye. We also ship to France and install within about 200 km of Béziers. See our service areas and finished work in the gallery.
Send a photo and approximate size through our contact page, WhatsApp or phone, and we will start the process together.
Conclusion
Custom work is the sum of good measurement, a written quote, an approved drawing and careful installation. Settling each step keeps time and cost under control, and you end up with a durable piece that fits your space exactly.
Related reading: Steel Structure Guide for İzmir · How to Choose Balcony and Stair Railings · Metal Door Guide for İzmir
Frequently asked questions
How does a custom metalwork order start?
Usually with photos of the space, approximate sizes and the intended use, shared through the contact form, WhatsApp or phone. After a first idea is given, the exact measurement is taken on site.
Can I take the measurements myself?
Approximate sizes are enough for a first idea, but the measurement used for fabrication should be taken on site, after seeing wall and floor tolerances. Self-measured sizes raise the risk of errors in production.
What should a quote state in writing?
Product description and size, material and thickness, surface finish (galvanising, paint and so on), installation, transport, lead time, payment plan and warranty. The validity period should also be stated.
Is drawing approval needed before production?
Yes. For railings, stairs, doors and similar made-to-measure work, an approved drawing or dimensioned sketch reduces the risk of errors. The approved drawing becomes the reference for production.
How long do production and delivery take?
It depends on product type, size, surface finish and workload. A firm date is best obtained in writing after measurement and drawing approval.
What must I prepare before installation?
An empty, accessible work area, and advance notice of conditions such as electricity or lifts. In apartment buildings and estates, management permission and working hours should be settled beforehand.
Do you work outside İzmir or in France?
Yes. We build in our Buca workshop in İzmir and our own team handles measuring, shipping and installation across Türkiye. We also ship to France and install within about 200 km of Béziers.